Installation of power capacitor

Power capacitor, used for power system and electrical equipment. The environmental requirements for the installation of compensation capacitor are as follows:

1) The capacitor shall be installed in a place without corrosive gas, steam, violent vibration, impact, explosion, flammability and other hazards. The fire rating of capacitor shall not be lower than grade II.

2) Capacitors installed outdoors shall be protected from direct sunlight.

3) The ambient temperature of the capacitor room shall meet the requirements of the manufacturer, generally 40 ℃.

4) When a ventilator is installed in the capacitor room, the air outlet shall be installed at the upper end of the capacitor bank. The inlet and exhaust fans should be installed at the diagonal position.

5) Natural lighting and artificial lighting can be used in the capacitor room without heating device.

6) The door of high voltage capacitor room shall be opened outwards.

(some materials of this website come from the Internet. If the information displayed on this website infringes upon the intellectual property rights or other legitimate rights and interests of the media or individuals, please inform us in time and we will delete it immediately.)